BettSun 1B114D6A40L · 900 W 12 V / 40 A AC-DC Battery Charger

  • 900 W class output — 40 A at 14.6 V (882 W max), for fast recharge of 12 V battery banks.
  • Wide AC input — 90–130 Vac, 50/60 Hz, with a standard US input socket.
  • CC/CV charging — constant current to absorption voltage, then a clean constant-voltage taper; fast without overcharging.
  • Haute efficacité — ≥88% at 120 Vac and rated load, with low heat and a passive aluminium heatsink.
  • IP68 sealed body — waterproof, dustproof and shock-resistant aluminium housing for engine bays, marine lockers and outdoor cabinets.
  • Full protection set — reverse polarity, over-current, short circuit, over-temperature and software over-voltage protection.
  • Compact and install-ready — 165 × 100 × 60 mm, 2.0 kg; 1.5 m input cable, 0.5 m output lead and 2 m DC extension with 5/16″ ring terminals.
  • Wide operating range — -10 to +40 °C, storage -40 to +70 °C, humidity 5–95%.
  • Certified and covered — CE, RoHS, GS, UL, CCC, SAA, PSE, KC; IEC 60335-2-29 / 60335-1 and UL 1564; 3-year warranty.

$300.00

40 A High-Current Output
14.6 V at 40 A, up to 882 W. Deep-cycle banks recharge in hours, not days.
Wide 90–130 V AC Input
Runs on standard 110 V supply and rides through generator sag and long cable runs.
CC / CV Charging
Constant current to absorption voltage, then a clean taper. Fast without overcharging.
IP68 Sealed Aluminium Body
Waterproof, dustproof housing for engine bays, marine lockers and outdoor cabinets.
Full Protection Suite
Reverse polarity, over-current, short circuit and over-temperature protection, built in.

Protection de l'environnement

IP68

Specifications · BettSun 1B114D6A40L(900 W 12 V / 40 A AC-DC Charger)

Objet Spécifications
Marque BettSun
Modèle 1B114D6A40L
Product type AC-DC battery charger
Nominal battery voltage 12 V
Rated input voltage 110 Vac (US socket)
Input voltage range 90–130 Vac
AC input frequency 50 / 60 Hz
Output voltage 14.6 V ± 0.2 V
Output current 40 A ± 5%
Maximum output power 882 W
Charging mode CC / CV (constant current → constant voltage)
Efficacité ≥ 88% (Vin = 120 Vac, rated load)
Protections Reverse polarity, over-current, short circuit, over-temperature, software over-voltage
Refroidissement Passive, aluminium housing
Ingress protection IP68
Dimensions 165 × 100 × 60 mm (6.5 × 3.94 × 2.36 in)
Net weight 2.0 kg (4.4 lb)
Input cable 1.5 m (4.92 ft)
Output cable 0.5 m (1.64 ft)
DC extension cable 2 m (6.56 ft) with 5/16″ ring terminal
Operating temperature -10 to +40 °C
Storage temperature -40 to +70 °C
Certifications CE, RoHS, GS, UL, CCC, SAA, PSE, KC
Normes IEC 60335-2-29 / IEC 60335-1; UL 1564
Garantie 3 ans

Produits apparentés

Découvrez les onduleurs de premier plan dans notre section produits, chacun d'entre eux étant conçu pour une efficacité et une fiabilité maximales dans n'importe quel environnement.

Nos blogs

Plongez dans nos blogs pour y trouver des articles pertinents sur la technologie des onduleurs, les tendances énergétiques et des conseils pour optimiser vos solutions d'alimentation.